Service – Welltech WG2626 V.2.0 User Manual
Page 16
WellGate 2626 User Manual EN-V2.0
Copyright © 2010 Welltech Computer Co., Ltd. All right reserved.
15
Service
To initial the VoIP service,
you will need a SIP account provided by the SIP Proxy
you are registered with.
To configure the relevant SIP settings, please refer to
the instructions step by step.
Service_Preference
(Figure 10)
1.
In the “Service_Preference” section (see figure 10), you can specify the
“Codec Policy” by your requirement of environment. The priority of codecs for
the three types are shown below:
Bandwidth: If your Internet Connection had very limited bandwidth,
please select bandwidth priority. The codec priority will be G.723, G.729
and G.711.
Regular : For most of case or unknown environment, please select
Regular. The codec priority will be G729, G.723 and G.711.
Quality : If your network is only running on the LAN environment or
have no any concerns of bandwidth, please select Quality. The codec
priority will be G.711, G.729 and G.723
The default setting is “Regular”.
2.
Press the “Apply” button (at the bottom) after you finish to save changes.
3.
Press the “Reboot” button to apply the changes.