Welltech WG2626 V.2.0 - Manual (Page 12)

WellGate 2626 User Manual EN-V2.0
Copyright © 2010 Welltech Computer Co., Ltd. All right reserved. 11
Device_WAN Setting
Item Description Static IP DHCP PPPoE
Default gateway Specify the IP address of the
default gateway.
V
Remote access
restriction
Restricts/Blocks users
connecting to the WAN port’s
IP remotely, you can
Enable/Disable this option.
V V V
PPPoE userID Specify the username of the
PPPoE account
V
PPPoE password Specify the password
associated to the PPPoE
account above.
V
Reboot after remote
host disconnection
When the remote host
(PPPoE) fails, the gateway
will retry 3 times to
reconnect, if there is no reply
from the remote host within 3
tries, then the gateway will
reboot. You can
Enable/Disable this option.
V
MTU It is used to specify the max
transmission unit when using
PPPoE. The default value is
1492 and it could be smaller
is you are encounter the
PPPoE connecting issues.
V