Welltech WG2626 V.2.0 - Manual (Page 3)

WellGate 2626 User Manual EN-V2.0
Copyright © 2010 Welltech Computer Co., Ltd. All right reserved. 2
Introduction
WellGate™ 2626 - An Easy to Use PBX Gateway
Wellgate 2626 is a plug and play PBX gateway for SOHO and small office user
which provides 2 PSTN lines, 6 Extension and SIP Calls together. It can work
stand-along without any network connection just power on and use it. Also it
becomes a small and simple IP-PBX when you enable the SIP service.
With enabling built-in auto attendant, Wellgate 2626 can guide the caller from
both VOIP and PSTN to reach the extension automatically. Or the incoming call
can be routed to the predefined operation when disable the auto attendant
service.
For emergency call (e.g. 911), Wellgate 2626 can be configured to route through
PSTN instead of VOIP to meet different country’s legal requirements. When the
power is lost or Wellgate 2626 is malfunction, the bypass feature will ensure the
PSTN lines can still be reached.
Physical Interface:
Ethernet port (RJ-45, 10/100 base-T)
1-WAN port, for connect to router, ADSL modem (ATU-R), or switch hub
directly.
4-LAN port, for PC or other network devices connecting.
Telephony port (RJ-11)
2-FXO Ports, to connect with PSTN Line
6-FXS ports, as PABX Extension Line to connect with analog phone
Reset button (Factory Default)
AC power Jack
Status indicated LED
Indicates Ethernet, FXO, FXS, and SIP system status
Features:
Support Stand-Along Working without Network Connection
Ready to Run Default Settings