Welltech WG2626 V.2.0 - Manual (Page 18)

WellGate 2626 User Manual EN-V2.0
Copyright © 2010 Welltech Computer Co., Ltd. All right reserved. 17
long the system will think the ringing
operator is not able to take the call and
hunt to next. The default value is 20 to
40 seconds.
Operator Short Code Specify the short code of Operator (eg.
9 or 0). The default value is 9.
TEL 1 ~TEL6
Line Number Specify the extension number
Operator Specify the Operator priority of
incoming call; you can set the priority
from 1
st
to 6
th
or “NA” for extension.
TEL1 and TEL2 are the default
operators.
Forward Condition Specify the extensions forward
condition, you can choose the
following:
Disable
UNCONDITIONAL
BUSY
NO ANSWER
BUSY + NO ANSWER
Forward TEL Specify the forward extension number
1. Press the “Apply” button (at the bottom) after you finish to save changes.
2. Press the “Reboot” button to apply the changes.
Service_PSTN Line
(Figure 12)