Welltech WG2626 V.2.0 - Manual (Page 32)

WellGate 2626 User Manual EN-V2.0
Copyright © 2010 Welltech Computer Co., Ltd. All right reserved. 31
2. You will be prompted with a window requesting the location of the firmware.
3. Locate the firmware that is stored in your hard drive.
4. Once located, click the Open button.
5. Back in the web configuration menu, press the Start button (next to the Http
Upload’s browse button) to execute the upgrade process.
6. Please wait while the device updates itself with the firmware.
7. After the update process is finish, you will be taken to a web page indicating
that it was successful (see figure below).
Note: For consistency, it is recommended to reload default setting every time
you update the firmware on the WELLGATE 2626. However, you will lose all the
settings configured on the WELLGATE 2626 except Network configuration. For
more details on reload default setting, please refer to the next page below.