Watson-Marlow Qdos30 Universal - Manual (Page 42)

Watson-Marlow qdos30 Universal and Universal+ Pump User Manual 42
ACCEPT appears when high mA signal is within tolerance limits. Press ACCEPT to
accept the high signal input or CANCEL to return to the previous screen.
Setting high flow calibration
Using the +/- keys scroll to the desired flowrate. Select SET FLOW or press BACK
to return to the previous screen.
Setting a low signal
Send the low signal input to the pump, or enter the current value using the +/- keys.
If the range between the low and high signal is less than 1.5mA, the following error
message will be displayed.