Watson-Marlow MC100 - Manual (Page 25)

Users Manual
MC100
MC100 DeviceNet OM 1.15 EN Version: 1.04 Page 25 of 43
7.2.2 List of additional ADI’s
ADI No. Description Data type Range Default
8 Packed data ADI 1-6 Double integer 6 elements See ADI
9
Versions
Char Max.39 chars
See ADI
Alarm texts strings See 8.2.1
Warning text strings See 8.2.2
10 Alarm number Integer 0-17 0 - See 8.2.1
11 Warning number Integer 0-9 0 - See 8.2.2
12 Versions / Builds Integer - See ADI
13 Tubes sizes Integer 10 elements 80
14 Tubes steps/ml Integer 10 elements 127
15 Packed data ADI 1-6 Double integer 6 elements See ADI
16 Tubes sizes Double integer 10 elements 80
17 Tubes steps/ml Double integer 10 elements 127
18 Misc. Status bits Integer 1 element Not described
19 Misc. Diagnostics Integer 8 elements Not described
20 Reserved for Balance Float 1 element -
21 Reserved for Balance Double integer 1 element -
22 Reserved for Balance Float 1 element -
23 Reserved for Balance Integer 1 element -
24 Reserved for Balance Integer 1 element -
25 Packed status Misc 14 elements -
26
Distance in steps for
active pump
Double integer 1 element
Common for all these ADI’s are, that they are not necessary for the parameterization of the pumps,
but it is recommended, that at least ADI 9 or ADI 10/11 and ADI 13 is implemented.
ADI 18 and 19 is only used by technicians for service purposes
ADI 8, 15 and ADI 13, 16 and ADI 14, 17 are equal except for the data types, where ADI15,16,17 are
available to make things more easy in Allan Bradley PLC’s.