Vuzix Wrap 920AR - Manual (Page 27)

The Wrap Control Box has two modes of operation; when the OSD (On Screen
Display) is shown and when is it not displayed. The Control Buttons perform
different tasks in each of these operating modes.
When the OSD is NOT displayed:
Menu Select Buttons Opens or displays the OSD.
Adjustment Buttons Adjusts Wrap earphone volume.
Power Off & Toggle View Double-press to toggle between the previous 2D and 3D
mode.
Press and hold to toggle between Straight and Cross-eye
3D Views.
Power On & Menu Button Press to turn power on (Media Player Control Box only).
Press to display the OSD.
Press & hold to turn power off (Media Player Control
Box only).
Note: When using a Wrap VGA Adapter, unplug the eyewear’s USB connector if you wish to turn the
eyewear display off.
When the OSD IS displayed:
Menu Select Buttons Press to change OSD selection.
Adjustment Buttons Press to adjust the current OSD selection.
Power Off & Toggle Button Press to turn OSD display off.
Power On & Menu Button Press to cycle through OSD selections.