Visara eTerm 300 - Manual (Page 42)

3-18 707064-001
e Term 300/360/760 Windows-based Terminals
Printer Parameters, TN5250E
When TN5250E and terminal type 3812 are selected on the Connection Parameters
screen a new tab, 5250E Printer Parameters, will be displayed. The 5250E Printer
Parameter screen provides fields for entering additional settings for the printer emulation.
Once the settings are entered correctly the TN5250E printing will be automatically
configured on the AS/400 system. OS/400 versions prior to V4R3 may require certain
PTFs. Check with IBM to determine what PTFs you may require to support TN5250E
printing. Some fields are required as defined below:
• Device Name
This field entry is required. The name is arbitrary but must be unique. The name will
usually be supplied by the System Administrator.
• Message Queue
Not required. This field will identify the message queue where operational messages
are sent.
• Font
This field entry is required. The default value is 11.
• Form Feed
Not required. Identifies the type of forms used.
• Host Transform
This field entry is required. The default value is *YES.
• Host Transform Parameters
The Type and Model field is required. This field identifies the attached printer type.
If your printer type is not listed use a printer type with a compatible printer command
set. The other fields are not required.
• Workstation Customizing Object
Not required. Allows customization of the printer command stream.