Visara Master Console Center Scripting Guide - Manual (Page 89)

Chapter 5 Script Commands
Scripting Guide 89
CPUPOWER
Syntax:
CPUPOWER( %Port, %Operation)
Description:
Switches a CPU’s power ON or OFF.
Action: The power to the CPU that is connected to the specified MCC power
unit port is turned ON or OFF.
Parameters:
%Port. Numeric expression. The assigned power port number to
which the CPU is connected. Refer to Ports on page 24 for more
information.
%Operation. Numeric expression. ON switches on the power and
OFF switches off the power.
Returns: N/A.
Notes:
1. Refer to Manifest Constants on page 42 for the constants reference
list.
2. When powering off, first ensure that the operating systems are
shut down.
3. This function is not commonly used.
Example: %Operation := OFF
CPUPOWER( 1, ON)
CPUPOWER( 1, %Operation)
See Also:
DIUNIT, DOUNIT, HUMID, TEMP