Verilink QPRI 2921 (880-503143-001) Product Manual - Manual (Page 68)

Configuring the QPRI 2921 Via the NCM 2000 Craft Interface
3-34 Verilink QPRI 2921
Add Circuit
Submenu
Use this option to create a new circuit. Specify the ID for the circuit
port. The ID number must be unique (12 characters maximum).
Enter which timeslots will leave the source port, and which
timeslots will end at the destination port (from 1 to 24). Specify if
the timeslots are 56kbit/s or 64kbit/s in bandwidth.
Circuit IDs identify particular circuits. For instance, if you build a
circuit on card 3 from Net Port 1 to Net Port 2, the ID can be 312.
Or, use names to identify the circuits. The following graphic shows
that Circuit 1 has 1 to 15 timeslots and connects Source Port Net 1
to Destination Port Net 3. Circuit 2 has timeslots 16 to 24 and
connects Source Port Net 1 to Destination Port Net 4.
Figure 3-26 Create a New Circuit
Figure 3-27 Add Circuit Submenu
Net 1 Net 3
Net 2 Net 4
C2: Timeslots 16-24
C1: Timeslots 1-15
A [127.255.255.0] [1,2] QPRI > a A [127.255.255.0] [1,2] QPRI > a A [127.255.255.0] [1,2] QPRI > a A [127.255.255.0] [1,2] QPRI > a
Add Circuit -- [1,1] NCM 2000 Firmware 4.15 --
Add Circuit -- [1,1] NCM 2000 Firmware 4.15 -- Add Circuit -- [1,1] NCM 2000 Firmware 4.15 -- Add Circuit -- [1,1] NCM 2000 Firmware 4.15 --
N) Name: -- P) Priority: norm
N) Name: -- P) Priority: norm N) Name: -- P) Priority: norm N) Name: -- P) Priority: norm
T) Type: -- M) Mode: --
T) Type: -- M) Mode: -- T) Type: -- M) Mode: -- T) Type: -- M) Mode: --
SP) [-,-] undefined DP) [-,-] undefined
SP) [-,-] undefined DP) [-,-] undefined SP) [-,-] undefined DP) [-,-] undefined SP) [-,-] undefined DP) [-,-] undefined
SM) --src port chn-- DM) --dst port chn--
SM) --src port chn-- DM) --dst port chn-- SM) --src port chn-- DM) --dst port chn-- SM) --src port chn-- DM) --dst port chn--
(undefined port) (undefined port)
(undefined port) (undefined port) (undefined port) (undefined port) (undefined port) (undefined port)
(undefined port) (undefined port)
(undefined port) (undefined port) (undefined port) (undefined port) (undefined port) (undefined port)
(undefined port) (undefined port)
(undefined port) (undefined port) (undefined port) (undefined port) (undefined port) (undefined port)
(undefined port) (undefined port)
(undefined port) (undefined port) (undefined port) (undefined port) (undefined port) (undefined port)
U) Bus: -- ->-->>->> Circuit Inactive <<-<<--<-
U) Bus: -- ->-->>->> Circuit Inactive <<-<<--<- U) Bus: -- ->-->>->> Circuit Inactive <<-<<--<- U) Bus: -- ->-->>->> Circuit Inactive <<-<<--<-
S) Setup X) Exit
S) Setup X) Exit S) Setup X) Exit S) Setup X) Exit
A [127.255.255.0] [1,2] QPRI >
A [127.255.255.0] [1,2] QPRI > A [127.255.255.0] [1,2] QPRI > A [127.255.255.0] [1,2] QPRI >