Verilink QPRI 2921 (880-503143-001) Product Manual - Manual (Page 36)

Configuring the QPRI 2921 Via the NCM 2000 Craft Interface
3-2 Verilink QPRI 2921
NOTE: Setting the password on the NCM has no effect on the
passwords of the QPRI or other modules in the node. To set
the password for the QPRI module, you must access the QPRI
module via direct connection.
For more information on NCM security or password assignment,
see the NCM 2000 User Manual.
NCM Main Menu
The NCM Main Menu displays the contents of slots in the shelves
of the selected node.
NOTE: This manual deals with the QPRI module in particular and
the NCM module with regard only to how the NCM module
interacts with the QPRI module.
In the screen displayed via the NCM Main Menu:
• Slots containing QPRI modules show a PPPP at the intersection of
rows and columns that designate the shelf/slot location of the
QPRI module.
• The letter N NN N shows the location(s) containing NCM module(s).
• The letter surrounded by brackets ( [ ] [ ] [ ] [ ] ) designates the location
of the module that is referenced and modified via submenus
of the NCM Controller Menu.
• On initial log in, brackets surround the module being used as
the log-in access point.
• The NCM Controller Menu option S (shelf/slot) is used to
move to a desired module in the node.
In Figure 3-1, the NCM Main Menu shows a QPRI 2921 (designated
by
PPPP) in slot 2. Using the S) shelf/slot command, the currently
accessed module indicated by the square brackets ( [ ] [ ] [ ] [ ]) has been
changed to the QPRI 2921 in slot 2. The asterisk next to the N NN N
(which designates the NCM 2000 module) indicates that the NCM
2000 module is the node master.
NOTE: Many of the QPRI 2921 ASCII screens accessed via the NCM
2000 will differ significantly from those accessed via the
QPRI Local Port.