Verilink QPRI 2921 (880-503143-001) Product Manual - Manual (Page 65)

Configuring the QPRI 2921 Via the NCM 2000 Craft Interface
Verilink QPRI 2921 3-31
Net Port Alarm
Theshold Status
Menu
To display the Net Port Alarm Threshold Status Menu, enter S in
the Net Port Alarm Menu. This alarm register displays all major
and minor alarms that have occurred at each port. When an alarm is
cleared, the time stamp changes to reflect the time the alarm was
cleared.
This screen only displays information. You cannot change any of
the settings displayed via this screen. The settings must be
changed using the Net Port Alarm Threshold Configuration Menu
accessed through the Net Port Alarm Menu, Figure 3-21, option C.
Sn Severely Errored Second (SES) 15 min. Threshold/SES 24 hr. Threshold: Select
15-minute and 24-hour threshold values.
15 minute
Threshold:
1—900
0 to disable
24 hour
Threshold:
1—86400
0 to disable
Tn Bit Error Rate (BER) Threshold: Selecting 10 -9 will report more errors than 10 -4 . 1) DISABLE
2) 10E-4
3) 10E-5
4) 10E-6
5) 10E-7
6) 10E-8
7) 10E-9
X Exit this screen—Returns you to the Net Port Alarm Menu, Figure 3-21, Table
3-19.
Command Description Options