Verilink QPRI 2921 (880-503143-001) Product Manual - Manual (Page 50)

Configuring the QPRI 2921 Via the NCM 2000 Craft Interface
3-16 Verilink QPRI 2921
Port n PRI Call
Profile
Configuration
Menu
From the PRI Call Profile Configuration Menu, Figure 3-10,
selecting 1 or 2 will display a Port PRI Call Profile Configuration
Menu for that particular port. The example below shows that for
Port 1.
Figure 3-11 Port 1 PRI Call Profile Configuration Menu (sample)
Table 3-12 Port n PRI Call Profile Configuration Menu Commands
PRI Port n Add Call Profile Menu
To add a new call profile to the list of existing call profiles for the
previously selected port, select A in the Port n PRI Call Profile
Configuration Menu. Select the appropriate key for each
parameter.
The minimal information required to create a call profile is:
• Reference ID
• Direction (incoming/outgoing/both)
• Number of Own Digits
• Own Call Number
Command Description
A Add Call Profile—Displays the PRI Port 1 Add Call Profile Menu, Figure 3-12, Table 3-13.
M Modify Call Profile—Prompts for selection of a call profile to be edited,
Port n Enter Call Ref ID (0-0): Port n Enter Call Ref ID (0-0): Port n Enter Call Ref ID (0-0): Port n Enter Call Ref ID (0-0):
then displays the Modify Call Profile Menu.
Modify the Call Profile items by selecting the appropriate keys.
WARNING: After making changes, remember to select the option,
S) Send Call Profile S) Send Call Profile S) Send Call Profile S) Send Call Profile
or the changes will not be set up.
S Set Call Action—Prompts for selection of a call profile to define the profile to be set up or
taken down.
Port n Enter Call Action Ref ID (0-MAX): Port n Enter Call Action Ref ID (0-MAX): Port n Enter Call Action Ref ID (0-MAX): Port n Enter Call Action Ref ID (0-MAX):
Port n -- Set Call Action:
Port n -- Set Call Action: Port n -- Set Call Action: Port n -- Set Call Action:
1) Setup Call 2) Take Down Call 3) Exit
1) Setup Call 2) Take Down Call 3) Exit 1) Setup Call 2) Take Down Call 3) Exit 1) Setup Call 2) Take Down Call 3) Exit
D Delete Call Profile—Prompts for selection of a call profile ID for the call profile to be deleted.
Port n -- Disable entry number (0-0): Port n -- Disable entry number (0-0): Port n -- Disable entry number (0-0): Port n -- Disable entry number (0-0):
CAUTION: The prompt says "disable", but the result is deletion of the entry from the list of
call profiles. If you change your mind about deleting a call profile, enter a non-numeric value
at the prompt or enter a carriage return.
CAUTION: No confirmation prompt will be displayed when a requested profile is deleted.
X Exit to the PRI Call Profile Configuration Menu, Figure 3-10, Table 3-11.
-- QPRI PORT 1 CALL PROFILE CONFIGURATION MENU -- -- QPRI PORT 1 CALL PROFILE CONFIGURATION MENU -- -- QPRI PORT 1 CALL PROFILE CONFIGURATION MENU -- -- QPRI PORT 1 CALL PROFILE CONFIGURATION MENU --
Ref Own Number Ext Number Bandwidth Direction Status
Ref Own Number Ext Number Bandwidth Direction Status Ref Own Number Ext Number Bandwidth Direction Status Ref Own Number Ext Number Bandwidth Direction Status
A) Add Call Profile M) Modify Call Profile
A) Add Call Profile M) Modify Call Profile A) Add Call Profile M) Modify Call Profile A) Add Call Profile M) Modify Call Profile
S) Set Call Action D) Delete Call Profile
S) Set Call Action D) Delete Call Profile S) Set Call Action D) Delete Call Profile S) Set Call Action D) Delete Call Profile
X) Exit this screen
X) Exit this screen X) Exit this screen X) Exit this screen
[0.0.0.5] [1,2] QPRI >
[0.0.0.5] [1,2] QPRI > [0.0.0.5] [1,2] QPRI > [0.0.0.5] [1,2] QPRI >