Verilink QPRI 2921 (880-503143-001) Product Manual User Manual

Page 20

Quick Set-Up

2-4

Verilink QPRI 2921

Reconnect to the NCM Local port for further operations.

Figure 2-2 NCM Main Menu

-- VERILINK NCM CONTROLLER : FW Rev 4.15, Dec 13 1997 12:53:30 --

-- VERILINK NCM CONTROLLER : FW Rev 4.15, Dec 13 1997 12:53:30 --
Site Name: Verilink Test Access Level: 2

Site Name: Verilink Test Access Level: 2

Site Name: Verilink Test Access Level: 2
Managing at NEAR end node [127.255.255.0] Node ID: 0

Managing at NEAR end node [127.255.255.0] Node ID: 0

Managing at NEAR end node [127.255.255.0] Node ID: 0
<- SLOT ->

<- SLOT ->

<- SLOT ->
SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13

SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13

SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13
0 - - - - - - - - - - - - -

0 - - - - - - - - - - - - -

0 - - - - - - - - - - - - -
1 D *N [X]

1 D *N [X]

1 D *N [X]
2 - - - - - - - - - - - - -

2 - - - - - - - - - - - - -

2 - - - - - - - - - - - - -
3 - - - - - - - - - - - - -

3 - - - - - - - - - - - - -

3 - - - - - - - - - - - - -
4 - - - - - - - - - - - - -

4 - - - - - - - - - - - - -

4 - - - - - - - - - - - - -
KEY: A=DIDCSU, B=DIU/DBU, C=CSU, D=DIU, E=SDIU, F=DIU/DDS, G=DHDM,

KEY: A=DIDCSU, B=DIU/DBU, C=CSU, D=DIU, E=SDIU, F=DIU/DDS, G=DHDM,

KEY: A=DIDCSU, B=DIU/DBU, C=CSU, D=DIU, E=SDIU, F=DIU/DDS, G=DHDM,
H=ATM/IMUX, I=IDCSU, J=PEP, K=DAC, L=HLM, M=IMUX, N=NCM, P=QPRI,

H=ATM/IMUX, I=IDCSU, J=PEP, K=DAC, L=HLM, M=IMUX, N=NCM, P=QPRI,

H=ATM/IMUX, I=IDCSU, J=PEP, K=DAC, L=HLM, M=IMUX, N=NCM, P=QPRI,
Q=QUAD, R=SUBRATE, S=HSM, T=HDM, U=DCSU, V=VCU, X=QPRI

Q=QUAD, R=SUBRATE, S=HSM, T=HDM, U=DCSU, V=VCU, X=QPRI

Q=QUAD, R=SUBRATE, S=HSM, T=HDM, U=DCSU, V=VCU, X=QPRI
S) shelf/slot O) administration

S) shelf/slot O) administration

S) shelf/slot O) administration
C) configuration D) diagnostics

C) configuration D) diagnostics

C) configuration D) diagnostics
P) performance/status A) alarm

P) performance/status A) alarm

P) performance/status A) alarm
B) circuit manager I) manufacturing info

B) circuit manager I) manufacturing info

B) circuit manager I) manufacturing info
X) exit this screen

X) exit this screen

X) exit this screen
A [127.255.255.0] [1,1] QPRI >

A [127.255.255.0] [1,1] QPRI >

Menu Heading Area

Node “Map” (Physical

Location of Modules)

Command List

Firmware Version and Date of Release

Access Level (1-4)

Node Address

Data (Command) Entry Area

Module Key

Active NCM Master Designator

❷

❸

❶

❷
❸

❶

Asterisk indicates that the NCM is the Main Controller in the shelf

Indicator for the type of shelf: M= Multi-line, D = Dual-line

Brackets around module letter ( [X] ) indicate current module selected