Verilink PRISM 3111 (34-00242) Product Manual - Manual (Page 97)

RFC 1406 - DS1/E1 MIB 89
dsx1FarEndTotalUASs: (read-only)
GET: returns the number of Unavailable Seconds (per 54016) in the previous 24
hour period for the Far End
dsx1FarEndTotalCSSs: (read-only)
GET: returns the number of Controlled Slip Seconds (per 54016) in the previous
24 hour period for the Far End
dsx1FarEndTotalLESs: (read-only)
GET: returns the number of Bipolar Violation Seconds (per 54016) in the previous
24 hour period for the Far End
dsx1FarEndTotalPCVs: (read-only)
GET: returns 0
dsx1FarEndTotalBESs: (read-only)
GET: returns the number of Bursty Errored Seconds (per 54016) in the previous
24 hour period for the Far End
dsx1FarEndTotalDMs: (read-only)
GET: returns 0
dsx1FracTable dsx1FracIndex: (read-only)
GET:
(2) - if a NIC is not installed
(3) - if a NIC is installed
dsx1FracNumber: (read-only)
GET: returns the channel number (1-24)
dsx1FracIfIndex: (read-write)
GET: returns the number of the interface to which the specified channel is
assigned
SET: This can either allocate a channel to a port, or de-allocate a channel from a
port. In order to be allocated to a port, the port must either have no channels and
the desired channel to be allocated is idle, or if the port has channels, then the
desired channel must be on the boundary of the current allocation, and be idle. In
order to de-allocate from a port, the desired channel must be on the boundary of
the current allocation, and the set value is 0.