Verilink PRISM 3111 (34-00242) Product Manual - Manual (Page 86)

78 A PPENDIX A: SNMP A GENT
GET: returns the System Location string for the unit, defaults to ‘no system
location’
SET: sets the System Location string for the unit
sysServices: (read-only)
GET: returns a value of ‘72’ which represents a host offering application
services.
ifTable ifNumber: (read-only)
GET: returns the number of interfaces present on the unit, there are always a
minimum of 3 (SLIP, Network - DS1, and Port 1). There are two optional
interfaces, a NIC (Ethernet or Token Ring) and a Port 2 card.
ifIndex: (read-only)
GET: returns value of the specified interface, ordered as follows:
1 - SLIP
2 - NIC (if installed)
3 - DS1
4 - D/I (if installed)
5 - Port 1
6 - Port 2 (if installed)
7 - Dial Backup
ifDescr: (read-only)
GET: returns one of the following textual descriptions:
‘SLIP Interface’ - returned for the SLIP Interface
‘Ethernet NIC’ - returned for the NIC, for Ethernet interface
‘Token Ring NIC’ - returned for the NIC, for Token Ring
‘T1 Network Interface’ - returned for the DS1 interface
‘T1 DTE Interface’ - returned for the T1 DSX-1 interface (D/I)
‘V.35 Data Port 1’ - returned for Port 1 (if a V.35 interface)
‘V.35 Data Port 2’ - returned for Port 2 (if a V.35 interface)
‘530 Data Port 1’ - returned for Port 1 (if a EAI-530 interface)
‘530 Data Port 2’ - returned for Port 2 (if a EAI-530 interface)
‘DBU Interface’ - returned for dial backup
ifType: (read-only)
GET: returns one of the following integer values: