Verilink PRISM 3111 (34-00242) Product Manual - Manual (Page 85)

A
SNMP A
GENT
This unit has an embedded SNMP agent which can be accessed either through the
built in SLIP interface or the optional Network Interface Card (NIC). The NIC can
be either an Ethernet or Token Ring interface allowing access to the unit through a
Telnet or SNMP connection.
SNMP access to the unit is limited to Management Information Bases (MIBs)
supported by the embedded SNMP agent. The SNMP agent supports MIB-II (RFC
1213) and the latest DS1 MIB (RFC 1406). This appendix describes in detail how
the embedded SNMP agent conforms to the RFCs.
RFC 1213 This RFC defines the MIB-II specification.
systemTable sysDescr: (read-only)
GET: returns the string ‘TXPORT SNMP Agent’
sysObjectID: (read-only)
GET: returns the Object Identifier - 1.3.6.1.4.1.425.1.1
sysUpTime: (read-only)
GET: returns the time in hundredths of a second since the network interface was
reset.
sysContact: (read-write)
GET: returns the System Contact string for the unit, defaults to ‘no system
contact’
SET: sets the System Contact string for the unit
sysName: (read-write)
GET: returns the System Name string for the unit, defaults to ‘no system name’
SET: sets the System Name string for the unit
sysLocation: (read-write)