Verilink PRISM 3111 (34-00242) Product Manual - Manual (Page 87)

RFC 1213 79
slip(28) - returned for the SLIP Interface
ethernet-csmacd(6) - returned for Ethernet NIC
iso88025-tokenRing(9) - returned for Token Ring NIC
ds1(18) - returned for the DS1 interface
propPointToPointSerial(22) - returned for Port 1 & Port 2
ifMtu: (read-only)
GET: returns one of the following integer values:
296 - returned for the SLIP Interface
1500 - returned for the NIC interface (if Ethernet)
2000 - returned for the NIC interface (if Token Ring)
0 - returned for the DS1 interface, Port 1 and Port 2
ifSpeed: (read-only)
GET: returns the rate at which the interface is running:
1200 - returned for the SLIP Interface at 1200 baud
2400 - returned for the SLIP Interface at 2400 baud
9600 - returned for the SLIP Interface at 9600 baud
19200 - returned for the SLIP Interface at 19200 baud
10000000 - returned for the NIC (if Ethernet)
4000000 - returned for the NIC (if Token Ring @ 4 Mbps)
16000000 - returned for the NIC (if Token Ring @ 16 Mbps)
1544000 - returned for the DS1 interface. For Port 1 and Port 2 the rate of the
interface is returned, (Number of Channels * Port Rate Multiplier)
DBU - returns 19200 Async rate used for modem initialization and call setup
ifPhysAddress: (read-only)
GET: returns a value of 0 for all interfaces except the NIC interface, which returns
the physical address of the unit
ifAdminStatus: (read-write)
GET:
up(1) - returned for all interfaces
SET: not allowed
ifOperStatus: (read-only)
GET:
up(1) - returned if the interface is active, and does not have a testing status
down(2) - returned if the interface is not enabled