Verilink PRISM 3111 (34-00242) Product Manual - Manual (Page 56)

48 C HAPTER 4: T ERMINAL I NTERFACE
Alarms The Alarms screen (Figure 4-3) allows you to view the current alarm status of the
network and the DTE interfaces.
Figure 4-3 Alarms Screen
Net Alarms These status lines display the selected element’s current network signal alarm state
(Table 4-2). Alarms are determined by the selectable thresholds in the Alarm
Configuration screen on page 61.
Table 4-2 NET Alarm Indicators
Alarm Description
OK No alarm threshold has been exceeded, although errors may exist which do not
exceed thresholds.
ERR The Errored Seconds, Severely Errored Seconds, or Bipolar Errored Seconds
threshold is exceeded.
LOS The Loss Of Signal Seconds threshold is exceeded.
OOF The Out Of Frame Seconds threshold is exceeded.
RAI The Remote Alarm Seconds threshold is exceeded.
AIS The Alarm Indication Seconds threshold is exceeded.
UAS The Unavailable Seconds threshold is exceeded.
TST Unit is in BERT or loop condition.
DBA Dial Backup Active
DBF Dial Backup Failed