Verilink PRISM 3001 (34-00186) Product Manual - Manual (Page 54)

4-20 T ERMINAL O PERATION
Port Rate
Selects the required port bit rate in increments of 56 or 64 kbps, depending on the
selection in Rate Multiplier. The N multiplier ranges in value from 0 to 24.
# of Channels
Displays the number of channels to be passed through to Port 1. This number is
determined by the selection in Port Rate.
Transmit Clock
This field selects whether the INTERNAL DTE port clock or the EXTERNAL
terminal clock is used when data is transmitted from the DTE.
V.54 Loop
Selecting Enable allows the unit to respond to in-band V.54 loop commands. If
Disable is selected, the unit ignores these commands.
Invert Data
In the invert mode (YES), transmit and receive data are inverted at the port
interface. This function may be used as a means of guaranteeing ones density
when the data is composed of SDLC-type protocols. The choices are YES and NO.
CTS,DSR, and DCD Control
Setting any of these three fields to FORCE TRUE or FORCE FALSE allows the
forcing of the port control lead output state. INTERNAL allows for normal
operation as shown in Figure 4-12.
Carrier
EIA-530 V.35 RS-449
Detect
Data
12/30 H 20/23
4/19
5/13
6/22
8/10 F 13/31
E 11/29
D 9/27
C 7/25
AND
In Sync
T1 Receiver
Enabled
of Signal
Port
T1 Loss
Pin Numbers
Interface Connector
No Effect
PRISM
3001
Term
Ready
Data
To
Send
Request
To
Send
Clear
Set
Ready
Data
Figure 4-12 High-speed Data Port