Installing power supplies, Applying ac power, Installing power supplies -3 – Verilink AS4000 (34-00244) Product Manual User Manual

Page 39: Applying ac power -3

Hardware Installation

Verilink AS4000 User Manual

3-3

Figure 3-1

Shelf Mounting

37. Position the shelf at the designated location within the

equipment rack .

38. Secure shelf into place with machine screws.

Installing Power Supplies

This section describes the application of power to the AS4000.

Applying AC

Power

To apply power to the AS4000, do the following:

1. Plug the 115 VAC power supply into the AC outlet.

NOTE: If your site has UPS power, Verilink recommends connecting

one AC power supply to the UPS and the other power supply

directly to local commercial power. If there is a failure of the

UPS, service can continue.

2. Verify that the Power LED is lit on the power supply front

panel. If the LED is not lit, verify the voltage at the AC power
outlet.