Verilink AS4000 (34-00244) Product Manual - Manual (Page 11)

Verilink AS4000 User Manual 1-1
Chapter
1
Overview
Scope
This manual describes the Verilink AS4000 Integrated Access
System. The content of this manual is organized in the following
fashion:
This chapter presents an overview of the product.
Chapter 2, “Quick Set-Up Guide”, provides a step-by-step procedure
for an example configuration. It is intended as a guide to the
installation process.
Chapter 3, “Hardware Installation”, describes the AS4000 hardware
and hardware installation procedures in detail.
Chapter 4, “System Menus”, provides complete details on the
System Manager Module.
Chapter 5, “Quad DS-1 Module”, provides complete details on the
Quad DS-1 Module.
Chapter 6, “Quad Port Sync Data Module”, provides complete
details on the Quad Port Sync Data Module.
Chapter 7, “DS-3 Module”, provides complete details on the DS-3
Module.
Chapter 8, “Test Access Module (TAM)”, provides complete details
on the Test and Access Module.
Appendix A, “TFTP and Telnet” , describes the use of Telnet and
TFTP for remote access and firmware downloads.
Appendix B, “Interfaces and Cables” , provides connector pinout and
cable information.
NOTE: Certain product menus and documentation entries refer to
additional application modules for the AS4000. These include
HDSL, SDSL, DDS OCU and Voice functions. These modules
are planned for a future AS4000 release.