Verilink APS 2000 T1 Line Protection (880-502411-001) Product Manual User Manual

Page 38

Configuration

3-10

Verilink APS 2000 User Manual

4. Configure the specific parameters for SLIP and/or Ethernet.

To configure for SLIP

, enter "A" to access the following

configuration screen.

Figure 3-4

Sequentially enter and configure each parameter on the
screen.

To configure for Ethernet

, enter "E" to access the following

configuration screen.

Figure 3-5

Ethernet Configuration

Sequentially enter and configure each parameter on the
screen.

To configure traps,

enter "M" to access the following

configuration screen.

---- host configuration for slip ----

L) Slip Local ip address : 192.94.45.96

L) Slip Local ip address : 192.94.45.96
P) Slip Peer ip address : 192.94.45.101

P) Slip Peer ip address : 192.94.45.101

P) Slip Peer ip address : 192.94.45.101
S) Slip Subnet Mask : 255.255.255.0

S) Slip Subnet Mask : 255.255.255.0

S) Slip Subnet Mask : 255.255.255.0
X) exit

X) exit

[1,1] NEAR TAC

[1,1] NEAR TAC
2110 >

2110 >

---- host configuration for Ethernet ----

L) Ethernet Local ip address : 192.94.45.96

L) Ethernet Local ip address : 192.94.45.96
S) Ethernet Subnet Mask : 255.255.255.0

S) Ethernet Subnet Mask : 255.255.255.0

S) Ethernet Subnet Mask : 255.255.255.0
T) Ethernet Type : Ethernet/DIX

T) Ethernet Type : Ethernet/DIX

T) Ethernet Type : Ethernet/DIX
X) exit

X) exit

[1,1] NEAR TAC 2110 >