Verilink APS 2000 T1 Line Protection (880-502411-001) Product Manual - Manual (Page 18)

Overview
1-10 Verilink APS 2000 User Manual
System Cabling Requirements
This section describes the various cables used to connect all the
components of the Automatic Protection Switch application. These
are shown in
Figure 1-5 .
Required Cables The tables and figures below describe types of cables, indicate
cable connections and give pinout information for required cables.
Table 1-1 Cables Used with APS 2000
Table 1-2 Cables Available from Verilink
Cable Description
T1 network interface cable These T1-grade transmission cables connect the SCC 2120 (via the
CIM 2022 APS) or TAC 2110 (via the CIM 2010 APS) to the T1 network.
Priority cable This cable goes from the APS OUT port of one CIM to the APS IN port of
the next lower priority CIM. Additionally, for the CIM 2022 APS in the
first shelf’s slot, it connects the EQPT port and the APS IN port on that
CIM.
Controller bus expansion
cable
The controller bus expansion cable has a 6-pin, mini-modular male
connector (RJ-11) on each end. This cable extends network
management from Shelf 1 (the SCC 2120 CSU/Controller) to other
shelves in the node.
Customer Premises
Equipment cable
This cable connects the DSX-1 equipment to the CIM 2010 APS EQPT
connector.
Craft interface cable This cable connects an ASCII terminal or a PC to the Craft interface port
on the SCC 2120.
SLIP cable This cable connects from the CIM 2022 APS SLIP connector to the
terminal server or modem, providing a SLIP interface.
Ethernet transceiver This adapter connects the CIM 2022 APS E THERNET port to the Ethernet
cable via 10BaseT or 10Base2.
Ethernet cable This cable connects the Ethernet transceiver to the LAN.
Cable Type Part Number Description
T1 Network Interface 458-501767-xxx RJ-48C (male) to Open Wire
458-501768-xxx RJ-48C (male) to DA-15 (male)
458-501769-xxx RJ-48C (male) to RJ-48C (male)
Controller Bus
Expansion
458-501761-002 RS-485, 20-inch, RJ-11 male connectors
458-501761-004 RS-485, 40-inch, RJ-11 male connectors
458-501761-006 RS-485, 60-inch, RJ-11 male connectors