Tri Tool 206B Beveler - Manual (Page 6)

6
TRI TOOL INC.
92-0211 : Rev. 050224
GENERAL DESCRIPTION
The Model 206B is a Pipe Beveler designed for facing, beveling and/or
counterboring the ends of pipe and/or tubing in preparation for welding.
These machining operations may be performed either simultaneously or separately.
Pipe weld end preparations that meet all existing conventional codes including the
more stringent nuclear codes may be machined using the Model 206B.
The various interchangeable jaw blocks and ramps will secure the Model 206B Pipe
Beveler to pipe and tubing having an inside diameter ranging from 1.63” (41.4 mm)
through 6.49” (164.8 mm).
The expanding mandrel provides fast, accurate self-centering and alignment to the
pipe or tubing to be machined.
The Model 206B accepts the reaction torque generated by the machining operations
through the mandrel.
No additional restraining devices are required.