Tri Tool 206B Beveler User Manual
Page 13

13
Model 206B BEVELMASTER™
92-0211 : Rev. 050224
115 VAC, 40 – 60 Hz, 2300 Watt rated Supply
All 115V motors require a minimum of a 20-amp circuit.
230 VAC, 40 – 60 Hz, 2300 Watt Rated Supply
PIPE CUTTING CAPACITIES
Basic Pipe Sizes
1 1/2” Pipe
Schedules 5 and 10
2” and 2 1/2" Pipe
Schedules 5 through 160
3” through 6” Pipe
All Schedules
Basic Tube Sizes
Up to .875 (22.2 mm) wall tubing with a maximum OD of 6.63” (168.4 mm)
and a minimum ID of 1.63 (41.4 mm) may be beveled with standard mandrel.
Wall Thickness Capacity
Wall thickness of all standard pipe schedules, .875 (22.2 mm) maximum, in
the range listed. Tubing with greater wall thickness may be handled provided
the ID is greater than 1.63” (41.4 mm) and the OD is less than 6.63” (168.4
mm). Contact TRI TOOL Inc. for heavier wall procedures.
Counterboring Operations
The tool will counterbore pipe and tubing with an ID range of 2.00” (50.8 mm)
to 6.41” (162.8 mm).
Material Cutting Capabilities
Mild steels, chrome steels (Rc 35 max.), stainless steel, copper-nickel and
aluminum with out limitations except size and wall thickness as specified in
the previous information.
Inconel and some other high temperature alloys may require special proce-
dures as a function of wall thickness and type of end preparation.
Contact TRI TOOL Inc. Engineering Department for details.