Tri Tool 206B Beveler - Manual (Page 23)

23
Model 206B BEVELMASTER™
92-0211 : Rev. 050224
Discontinue feed and allow the head to rotate one (1) to three (3) revolutions
to improve the finish of the prep surface.
Release the trigger to stop the head rotation.
Rotate the Feed Handle counterclockwise to separate the Tool Bit(s) from the
pipe.
Rotate the feed handle counterclockwise until the tool bit is 1/8” (3 mm)
minimum from the end of the pipe or tube.
Loosen the draw nut on the mandrel to release the mandrel from the pipe.
The mandrel assembly may be left in the Model 206B and installed as a
complete assembly.