Tri Tool 206B Beveler - Manual (Page 11)

11
Model 206B BEVELMASTER™
92-0211 : Rev. 050224
Power Requirements
110V AC, 60Hz or 220V AC, 50 Hz
PIPE CUTTING CAPACITIES
Basic Pipe Sizes
1 1/2” Pipe Schedules 5 and 10
2” and 2 1/2” Pipe Schedule 5 through 80
3” through 6” Pipe Schedule 5 through 40
Basic Tube Sizes
Up to .280” (7.1 mm) wall tubing with a maximum OD of 6.63” (168.4 mm)
and a minimum ID of 1.63” (41.4 mm) may be beveled with standard proce-
dures.
Wall Thickness Capacity
Wall thickness of all standard pipe schedules, .280” (7.1 mm) max., in the
ranges listed.
Contact TRI TOOL Inc. for heavier wall procedures.
Counterboring Operation
The machine will counterbore pipe and tubing with an ID range of 2.00” (50.8
mm) to 6.41” (162.8 mm).
Material Cutting Capability
Mild steels, chrome steels (Rc 35 max.), stainless steel, copper-nickel and
aluminum without limitations except size and wall thickness as specified
under ‘Wall Thickness Capacity’.
Inconel and some other high temperature alloys may require special proce-
dures as a function of wall thickness and type of end preparation.
Contact the TRI TOOL INC. Engineering Department for details.
Headstock Speeds