Tri Tool 206B Beveler - Manual (Page 15)

15
Model 206B BEVELMASTER™
92-0211 : Rev. 050224
NOTE:
MAINTENANCE
All components should be cleaned and coated with a light film of oil prior to use.
Use a clean, non-detergent oil, preferably SAE 10 (90 SSU) or lighter or oil as speci-
fied for the air motor.
AIR SUPPLY
Air Supply for the Model 206B with an air motor requires an adequate filter/regulator/
lubricator (FRL) to be used in the air supply line.
The motor warranty is void if damage occurs from contaminated air or lack of
lubrication.
When the Model 206B is operated in the vertical position, cutting head up, it should
be turned upside down and the chips and/or other debris removed after each bevel
has been completed.