Thinklogical StudioPRO Extender Manual - Manual (Page 9)

®
S t u d i o P R O E x t e n d e r P r o d u c t M a n u a l , R e v . D , O c t o b e r , 2 0 1 3 Page 8
Optical Budget
>6 dB multi-mode; >15 dB single-mode 40km optics; >8 dB single-mode
10km optics
Laser Output
Specifications
Transmitter and Receiver lasers meet Class 1 Laser specifications.
(Class 1 lasers do not require any special precautions under conditions of
normal use.)
Fiber-Optic Cables
Single-Link:
L1: Data Tx to Rx and Video
L2: Data Rx to Tx
Dual-Link:
L1: Data Tx to Rx and Video (Primary)
L2: Data Rx to Tx
L3: Video (Secondary)
Fiber is either multi-mode, 50 micron or 62.5 micron with ST-, SC- or LC-
type connectors or single-mode with LC-type connectors.* (Fiber cable is
either customer-supplied or can be ordered from Thinklogical.)
Fiber Distances
Up to 350 meters using type OM2 (5/125µm)
Up to 750 meters using type OM3 enhanced (5/125µm)
Up to 1000 meters using type OM4 (5/125µm)
Up to 40 kilometers using single-mode (9/125µm)
Optical Couplant
For use with all Single-Mode models only.
A syringe pre-loaded with optical coupling gel is available. The gel is applied
to the connector end face to reduce the difference in the index of refraction
and Fresnel reflections at the interface of the mated connectors.
Operating
Temperature
& Humidity
0 to 50 °C (32 to 122 °F), 5 to 95% RH, non-condens ing
Housing
Dimensions*
Without mounting brackets:
7.875” W x 6.625” D x 1.75” H
(200.02 mm x 168.27 mm x 44.45 mm)
With mounting brackets:
9.00” W x 6.625” D x 1.75” H
(228.60 mm x 168.27 mm x 44.45 mm)
Wall-mount keyhole slot spacing:
8.50” W x 5.75” D
(215.90 mm x 146.05 mm)
Rack-Mount Housing without mounting brackets:
17.47” W x 11.34” D x 1.72” H
(443.64 mm x 287.99 mm x 43.69 mm)
Rack-Mount Housing with mounting brackets:
19.01” W x 11.34” D x 1.72” H
(482.75 mm x 287.99 mm x 43.69 mm)
Supply Voltage
Input: AC 100-240V @ 50/60Hz 0.55A
Output: +5.0 VDC @ 4 A
*Also see Appendix B, page 22 for more housing dimensions