Thinklogical StudioPRO Extender Manual - Manual (Page 18)

®
S t u d i o P R O E x t e n d e r P r o d u c t M a n u a l , R e v . D , O c t o b e r , 2 0 1 3 Page 17
4.1.3 Industry-Standard Connections to the Product
Connections and installation hardware for the product use industry-standard devices and methods. All
wiring connections to the customer equipment minimize proprietary or customized connectors and
cabling. Power connections are made with regionally appropriate power cords and approved methods.
4.2 Regulatory Compliance
Thinklogical
®
SPE products are designed and made in the U.S.A. SPE products have been tested by a
nationally certified testing laboratory and found to be compliant with the following standards (both
domestic USA and international locations).
4.2.1 North America
These products comply with the following standards:
Safety
• UL60950: 2000
• CAN/CSA C22.2 No. 60950-00
LASER Safety
• CDRH 21CFR 1040.10
• Class 1 LASER Product
Electromagnetic Interference
• FCC CFR47, Part 15, Class A
• Industry Canada ICES-003 Issue 2, Revision 1
4.2.2 Australia & New Zealand
This is a Class A product. In a domestic environment this product may cause radio interference, in which
case the user may be required to take adequate measures.
4.2.3 European Union
4.2.3.1 Declaration of Conformity
Manufacturer’s Name & Address: Thinklogical, LLC ®
100 Washington Street
Milford, Connecticut 06460 USA
Telephone 1-203-647-8700
Product Name: StudioPRO USB 2.0 and DVI Extender
These products comply with the requirements of the Low Voltage Directive 72/23/EEC and the EMC
Directive 89/336/EEC.
4.2.4 Product Standards Compliance
Safety
• IEC60950:1992+A1, A2, A3, A4, A11
LASER Safety
• IEC60825-1/2
• Class 1 LASER Product
Electromagnetic Emissions
• EN55022: 1994 (IEC/CSPIR22: 1993)
• EN61000-3-2/A14: 2000
• EN61000-3-3: 1994