Teo 8810 ISDN Phone Installation - Manual (Page 43)

Administration Options
13-280118 Rev. C Page 43
L1:OK L2:OK TEI=64
L3:OK SWITCH=5ESS NI-X
RESTART/CLEAR CALL LOG?
YES NO
Diagnostic Display ___________________________________________
From the Administration Options menu, select.
(
SETUP → ADMIN → DIAG)
The display will show the states of layers 1, 2, and 3, the Terminal Endpoint Identifier, and the
network switch type.
Press the OK key to return to the Administration Options menu or press the SETUP key to exit
Setup Mode.
Restart _____________________________________________________
Select Restart to reset the phone. If you are on an active call you will be disconnected. The call log will be
cleared. No configuration parameters will be altered.
From the Administration Options menu, select RESTART.
(
SETUP → ADMIN → ► → RESTART)
Select YES to restart the phone.