Teo 8810 ISDN Phone Installation - Manual (Page 16)

Tone Commander 8810 Installation Instructions
Page 16 13-280118 Rev. C
Attaching to a wall mount jack
• Plug an 8”, 8-pin line cord into the S/T IN jack (8810T) or the U IN jack (8810U) on the telephone. If you
do not have one, you can obtain an 8” line cord by calling Tone Commander Technical Support at
(800) 524-0024.
• Hold the telephone next to the wall mount jack. Plug the line cord into the jack.
• Hang the telephone on the wall plate mounting studs. The top mounting stud fits into the keyhole slot in
the phone expansion cover or optional Terminal Adapter, and the bottom stud slides into the ‘U’-shaped
slot in the wedge base. Press down firmly to lock into place.
Handset Retainer Clip, Wall Mount or High Desktop Position Applications
Pull out the handset retainer clip as shown. Rotate the clip 180°, and then re-insert the clip. The tab should
protrude into the hookswitch area for wall mount or high desktop position use.