Teo 8810 ISDN Phone Installation - Manual (Page 37)

13-280118 Rev. C Page 37
SETUP MENU
INSTL ADMIN USER
POTS
ADMINISTRATION OPTIONS >
INSPCT VERS TEST DIAG
ADMINISTRATION OPTIONS >
RESTART LOG
LOCAL INSPECT
KEYS DNs MESSAGE
Administration Options
The following test and diagnostic options are available from the Administration Options menu:
• Local Inspect • Test Functions
• Hardware Version • Diagnostics
• Software Version • Terminal Restart
• Serial Number • Error Log
Administration Options Menu __________________________________
You can enter from the Administration Options menu when the phone is idle or during an active call.
Press the SETUP key.
Select ADMIN.
When ► appears in the upper line of the display, you can press the Left or Right Arrow key to see
additional menu selections.
Note : The POTS option is only available when the 8002TA or 8003TA Analog Port Terminal Adapter is
installed.
Local Inspect ________________________________________________
Local Inspect allows you to identify the call appearance/directory number or feature assignment of each
configured key, directory numbers, and the feature indicator assignment for the Message Waiting Indicator.
You can use Local Inspect after a Parameter Download to verify call appearance and feature assignments.
From the Administration Options menu, select INSPCT.
(
SETUP → ADMIN → INSPCT)
Select KEYS, DNs (Directory Numbers), or MESSAGE (Message Waiting Indicator). Each option
is described below.