Teo 8810 ISDN Phone Installation - Manual (Page 24)

Tone Commander 8810 Installation Instructions
Page 24 13-280118 Rev. C
07=NETWORK FA#59 (CALL)
LABEL:Call Forward
Feature Activator Keys
Feature Activator keys must be configured to match network feature activator codes that have been
assigned to your line.
Using the dial pad, enter the feature activator code assigned by your network service provider.
If you need to make corrections while entering numbers, select
◄BKSP (backspace) to delete the
previous digit.
Select CALL if a call needs to be originated when the feature is activated. When enabled, (CALL)
will appear in the top line of the display as shown above.
With CALL enabled, the feature is always activated within the context of a call. Features that need
to originate a call include Call Forward (on Siemens EWSD), ICM intercom (on Nortel DMS-100),
and Call Pickup.
If the phone is on-hook when a Feature Activator key with CALL enabled is pressed, a new call
will be originated. If the phone is already off-hook when the feature key is pressed, the feature will
be activated within the context of the current call.
The CALL feature is not used with Lucent 5ESS Custom ISDN and Avaya Definity Custom ISDN.
Feature Activator keys are automatically labeled on the display after a Parameter Download, and
after manually changing an unused key to a Feature Activator key. To change the label, select
LABEL.
The label entry mode defaults to predefined text labels, as indicated by ‘TEXT’ in the display
above the 3
rd softkey. Press a dial pad key to select one of the 10 predefined labels.
Note: Selecting a predefined label does not change the key function. The key must be
programmed with the correct Feature Activator code, as required by the network.
Predefined Feature Activator labels are shown in the table below.
Dial Pad
Key #
Predefined Label
1 CALL FORWARD
2 PRIVACY
3 AUTOMATIC CALLBACK
4 GROUP CALL PICKUP
5 DIRECTED CALL PICKUP
6 AUTOMATIC RECALL
7 CALL PARK
8 PARK RETREIVE
9 PRIORITY CALL
0 INTERCOM