Teo 8810 ISDN Phone Installation - Manual (Page 26)

Tone Commander 8810 Installation Instructions
Page 26 13-280118 Rev. C
5551234
5551234P1P12
Speed Dial Keys
Keys not assigned for call appearances or Feature Activators may be used as Speed Dial keys. Dialing
strings can include network feature activator codes, to simplify the use of features such as Directed Call
Pickup and Call Forwarding. Speed Dial keys may also be programmed from the User Options menu.
The currently programmed dial string, if any, will be shown in the display.
Enter digits (24 maximum) with the dial pad.
After entering the first digit, pause, or feature activator, the FA softkey will be replaced by CLEAR.
If you need to make corrections while entering numbers, select ◄BKSP (backspace) to delete the
previous digit.
CLEAR removes all digits, allowing you to start over. A Speed Dial key will revert to 'Unused' if
saved with a cleared dial string.
Speed Dial keys are automatically labeled on the display after changing an Unused key to a
Speed Dial key. You can customize the labels with the dial pad – refer to page 23.
“Smart” Pauses
Pauses are entered with the PAUSE softkey, and are shown in the display as a P character. The
first pause in a dial string will wait until the call is answered; additional pauses delay dialing for
one second. Enter multiple pauses to increase the delay time.