Teo 8810 ISDN Phone Installation - Manual (Page 32)

Tone Commander 8810 Installation Instructions
Page 32 13-280118 Rev. C
INSTALLATION PASSWORD
SET CLEAR
NEW PASSWORD:
ENTER AGAIN:
PASSWORD SET
Installation Password _________________________________________
You can set a password to prohibit unauthorized entry into the Installation Options menu.
If a password is currently set, the display will prompt you to enter your password prior to making changes.
From the Installation Options menu, select PASSWD.
(
SETUP → INSTL → ► → PASSWD)
Select SET.
Enter a new 4 to 11 digit password with the dial pad.
If you need to change a password digit after entering it, select
Å BKSP (backspace) to delete the
previous digit.
Press the OK key.
Repeat the password when prompted to verify the new entry.
Press the OK key.
“PASSWORD SET” will be displayed to confirm the new password.
Record your password for future reference.
Press the OK key to return to the Installation Options menu or press the SETUP key to exit Setup
Mode.