Teo 8810 ISDN Phone Installation - Manual (Page 15)

Installation
13-280118 Rev. C Page 15
Handset Retainer Clip, Low Desktop Applications
For low desktop position use, the handset retainer clip should be installed in the default position, without
the tab protruding into the hookswitch area. Rotate the clip for high desktop applications – see page 16.
Wall Mounting _______________________________________________
The phone stand and handset retainer clip must be rotated for wall mounting.
• Remove the stand from the phone base – see page 13.
• Rotate the stand as shown below.
• To install the stand, insert the tabs on the telephone into the large openings in the stand’s upper slots,
and then press the stand toward the top of the telephone until it locks into place.