Teo 8810 ISDN Phone Installation - Manual (Page 33)

Installation Options
13-280118 Rev. C Page 33
PASSWORD CLEARED
RESET ALL SETUP OPTIONS?
YES NO
ALL SETTINGS CLEARED
PHONE WILL BE RESTARTED
INITIALIZING...
Removing the Password
Select CLEAR.
“PASSWORD CLEARED” will be displayed to confirm that the password has been removed.
Press the OK key to return to Installation Options menu or press the SETUP key to exit Setup
Mode.
What to do if you lose your password
Contact your system administrator or call Tone Commander technical support at (800) 524-0024 in the
event you misplace your password. You will need to report the serial number of your telephone to receive a
new password.
You can use the RESET option to remove all passwords. You must have access to the Installation Options
menu, which may be password protected, to use this feature. This option will clear all programmed
numbers and settings in your phone.
Reset to Factory Default Settings _______________________________
Reset returns all settings to the factory defaults, and clears all speed dial numbers, logs, and passwords.
This option is useful when moving the telephone to a new user or location.
Default values are listed in the table on page 55.
From the Installation Options menu, select RESET.
(
SETUP → INSTL → ► → RESET)
Select YES to confirm the reset operation.
Press the OK key to return to Installation Options menu or press the SETUP key to exit Setup
Mode. The phone will restart.