Teletronics EZStation5 - Manual (Page 154)

Page 154
which it sends datagrams because of
congestion.
Redirect Informs the host of a preferred route.
Time exceeded Indicates that the Time-to-Live (TTL) of
an IP datagram has expired.
Parameter Problem Informs that host that there is a problem
in one the ICMP parameter.
Timestamp Request Information that is from the ICMP data
packet.
Information Request Information that is from the ICMP data
packet.
Information Reply Information that is from the ICMP data
packet.
IGMP Types
: This IP protocol is used to establish host memberships in particular
multicast groups on a single network. The mechanisms of the
protocol allow a host to inform its local router, using Host
Membership Reports.
Host Membership
Report Information that is from the IGMP data
packet.
Host Membership
Query Information that is from the IGMP data
packet.
Leave Host
Message Information that is from the ICMP data
packet.
Source IP : This parameter allows you to specify workstation(s) generating
the data packets. Users can either set a single IP address or set a
range of IP addresses.
Destination
IP : This parameter lets you specify the set of workstations that
receive the data packets. Users can either set a single IP address
or set a range of IP addresses.
Source Port : You can control requests for using a specific application by
entering its port number here. Users can either set a single port
number or a range of port numbers.
Destination
Port : This parameter determines the application from the specified
destination port. Users can either set a single port number or a
range of port numbers.
Check
Options : This parameter refers to the options in the packet header. The
available selection options are abbreviated as follows:
SEC – Security
LSRR – Loose Source Routing