Teletronics EZStation5 - Manual (Page 132)

Page 132
You can enter the parameters based on the recommended values in the
pop-up window, click on the
A A p p p p l l y y button to update the changes.
Long Distance
Parameters Description
Outdoor If set to Enable, the Outdoor parameters will be
configured for outdoor communication over
short or long distances as specified, it is disabled
by default.
Distance Determines the distance between your access
point and the remote access point in meters.
Slot Time The amount of time is divided and each unit of
time is called one slot time.
ACK Timeout Determines the timeout allowed for the sending
client to receive the acknowledgment response
from the receiving client. If no acknowledgment
packet is received within this period, the sender
will assume the receiver has not received the
packet and will attempt to resend.
CTS Timeout Clear-to-Send Timeout is the time the wireless
sender will wait for a CTS packet signaling that
the channel is idle and it can start data
transmission. If no CTS packet is received within
this period, the sender will assume the channel is
busy and will wait before trying to send again.