Teac P-02 - Manual (Page 21)

21
EN
G
LI
SH
Setting mode items and explanations
UPCONV> ***
Upconversion setting
Sets the upconversion sampling frequency of the digital signal
output from XLR and RCA connectors during CD playback (see later
on this page).
UPC-A> ***
Upconversion algorithm setting
Sets the algorithm used during upconversion (see later on this
page).
WORD> ***
WORD SYNC setting
Sets the WORD SYNC mode (see page 22).
CLKIN> ***
WORD SYNC input connector setting
Sets the input connector that receives the WORD SYNC signal (see
page 22).
XLR> ***
XLR output setting
Sets the format of the digital signal output from the XLR
connectors (see page 22).
RCA> ***
RCA output setting
Sets the mode of digital output from the RCA connectors (see page
23).
i > ***
i.LINK output setting
Turns signal output from the i.LINK (AUDIO) connectors on and off
(see page 23).
DAC> ***
D/A converter setting
Sets the type of connected D/A converter (see page 23).
LAYER> ***
Playback priority area setting
Sets which layer is given playback priority when a 2-layer hybrid
disc with both Super Audio CD and CD layers is loaded (see page
23).
LOAD> ***
Disc loading setting
Sets the loading mode (see page 24).
FLaOFF> ***
Automatic display off setting
Sets the time until the display automatically turns off (see page 24).
LIGHT> ***
Tray indicator setting
Sets how the blue indicator above the tray lights (see page 24).
Setting Items (1)
Upconversion setting
UPCONV> ***
The standard CD sampling frequency of 44.1 kHz can be upconverted
2X, 4X or 8X before outputting from each output connector.
The factory default setting is "ORG".
< To use 8X upconversion, the unit must be connected to a D-02 and
the "XLR output setting" must be "Dual" and the "D/A converter
setting" must be "ESL3".
ORG (original)
No upconversion is used and output is at the standard sampling
frequency of 44.1 kHz.
2Fs
44.1kHz CD sampling frequency is upconverted 2X to 88.2 kHz and
output.
4Fs
44.1kHz CD sampling frequency is upconverted 4X to 176.4 kHz
and output.
8Fs
When connected to a D-02 and the "XLR output setting" is "Dual"
and the "D/A converter setting" is "ESL3", 44.1kHz CD sampling
frequency is upconverted 8X to 352.8 kHz and output. Under all
other conditions, 44.1kHz CD sampling frequency is upconverted
4X to 176.4 kHz and output. Two XLR cables must be connected
between the P-02 and D-02 to use "Dual XLR" mode.
< During Super Audio CD playback, upconversion does not occur.
Algorithm setting
UPC-A> ***
Sets the algorithm used for upconversion.
The factory default setting is "NF".
FIR
A FIR digital filter is used during upconversion.
NF
No digital filter is used during upconversion.