Track search, Playback modes, Track search playback modes – Teac CD-RW750 User Manual
Page 16: 3 – playback operations

3 – Playback operations
16
TASCAM CD-RW750
Owner’s Manual
Full disc title
When playback is stopped, pressing
the
DISPLAY
key switches between showing the total
running time of the disc and the disc title (if the final-
ized disc contains CD TEXT information). If the title
is longer than 12 characters, it scrolls across the
display.
Note that only titles containing alphabetic and
numeric characters can be displayed (and entered)
using the CD-RW750. Only one title per disc or track
may be displayed or entered (i.e. artist names cannot
be entered separately).
Track search
Use the
MULTI JOG
SKIP
keys on
the remote control unit
ward by one track at a time, as shown on the display.
Note that going forward from the last track of the
disc will “wrap round” to track 1, and going back-
ward from the first track of the disc will “wrap
round” to the last track of the disc.
The track number indicators at the bottom of the dis-
play shows the selected track (the lit indicator at the
left of the row of indicators).
It is also possible to use the number keys on the
remote control unit
to jump directly to a particular
track:
1
To play tracks 1 through 9, simply press the
appropriate key (
1
through
9
).
2
To play a track whose number is higher than
9, press the
+10
key an appropriate number of
times to set the “tens” digit of the track num-
ber, followed by a single key to set the “units”
digit. For example:
Track 13 =
+10
,
3
Track 30 =
+10
,
+10
,
+10
,
0
NOTE
On the remote control unit only, the
SEARCH
keys
can be used to “fast-forward” and “fast-rewind”
through the disc.
Playback modes
The unit can be set to play back a single track, the
whole disc in the order in which it was created, the
tracks of the disc in a random (shuffled) order, or a
programmed order (see “Programmed order play-
back” on page 17).
NOTE
Selecting the playback mode is only possible using the
remote control unit. It is not possible to select the play-
back mode using the main unit alone.
1
Press the
PLAY MODE
repeatedly to
cycle the display through the following:
•
Continue
. Normal playback mode. Program-
ming is cancelled, and playback continues in the
normal order.
•
Single
. The current track is played back from
the start of the track, and playback stops at the end
of the track. Note that the REPEAT ALL function
is not available when this playback mode is
selected.
•
Shuffle
(random track order). In this mode,
each track is played once before the disc repeats.
Using the track search functions will move back-
wards or forwards through the random order, e.g. if
track 7 is followed by track 10, it is possible to use
the track search keys to go back to track 7, which is
remembered as being before immediately before
track 10. The red
SHUFFLE
display indicator lights
in this mode.
•
Program
(see “Programmed order playback”
on page 17 below). The red
PROGRAM
display indi-
cator lights in this mode.
The selected mode is shown in large characters dis-
appears from the display a few seconds after select-
ing the mode, and the display returns to its previous
mode
The selected playback mode (other than Program
mode) is memorized and recalled when power is
turned off and on again.