Teac CD-RW750 - Manual (Page 13)

2 – Features of the CD-RW750
TASCAM CD-RW750 Owner’s Manual
13
RC-RW750 Remote control unit
1 OPEN/CLOSE key Opens and closes the
disc tray (equivalent to
3
).
2 Number keys (0 through 10 and +10)
Use these keys for direct entry of track numbers
when playing back, or making a programmed play
list.
3 CLEAR key Use this key to clear a mistaken
entry made with the number keys.
4 REPEAT key Use this key to change
between the various repeat modes when playing back
(see “Repeat play” on page 17).
5 A-B key Use this key to set the A-B repeat
points and playback mode (see “A-B repeat mode”
on page 17).
6 MENU key Repeated presses of this key cycle
through the different menu items used to set parame-
ters (equivalent to
9 ).
7 ENTER key Pressing this key is equivalent to
pressing the MULTI JOG control B to confirm an
entry.
8 MONITOR key Use this key to output the
signals received at the currently selected input(s)
through the outputs when not recording or in record
ready mode.
9 DISPLAY key Use this key to switch
between the different display modes available (equiv-
alent to
A ).
A PLAY MODE key Use this key to choose
between the different playback modes (single play,
continue play, etc.).
B FADER key Use this key to start fade-in
recordings or to start a fade-out when recording
(equivalent to
M ).
C FINALIZE key Use this key to finalize
recordable discs. See “Finalizing” on page 7 and
“Finalizing” on page 25 for details (equivalent to
F
).
D ERASE key Use this key (with CD-RW discs
only) to erase tracks, or a whole disc, or to refresh a
“bad” disc, or to unfinalize a finalized disc. See
“Erasing” on page 25 for details (equivalent to
G ).
E RECORD key Use this key to enter record
ready mode (equivalent to K ).
F SYNC REC key Use this key to turn syn-
chronized recording on and off (equivalent to L ).
See “Synchronized recording” on page 20 for details.
G REC MUTE key Use this key when record-
ing, to mute the input signal for about four seconds
and then to enter record ready mode (see “Rec mute
function” on page 23).
H SEARCH keys Use these keys to move the
playback position inside a track.
I SKIP keys Use these keys to move between
tracks when playing back (equivalent to turning
B
).
They are also used to set the parameter values, etc.
J STOP key Use this key to stop playback or
recording (equivalent to H ).
K PAUSE key Use this key to pause playback
or recording (equivalent to J ).
L PLAY key Use this key to start playback, or
enter record mode from record ready mode (equiva-
lent to
I
).
1
3
6
A
D
7
9
C
G
I
L
2
4
5
B
F
8
E
H
J
K