Teac 2488 Reference Manual - Manual (Page 7)

1 – MIDI Control/Program Change messages
TASCAM 2488 Reference Manual
7
Multi effect
Use MIDI channel 11 to set the parameters of this
effect. Note that this effect chains together a
sequence of effects (each step in the chain can hold one effect, the sequence in the chain of which is
given in the first column of this table):
Phaser (PHA)
00 00 Rate 1 – 100 = 0.1 – 10.0(Hz)
00 01 Depth 0 – 100 = 0 – 100
00 02 Resonance 0 – 100 = 0 – 100
00 03 Step 0 – 3 = 4, 8, 12, 16
00 04 Out Level 0 – 127 = 0 – 127
Gated reverb(GRV)
00 00 Type 0,1 = Normal, Reverse
00 01 Threshold 0 – 30 = –46 – –16(dB)
00 02 Gate Time 1 – 300 = 10 – 3000(msec)
00 03 Density 0 – 100 = 0 – 100
00 04 Out Level 0 – 127 = 0 – 127
Effect NRPN Parameter Values
Effect
chain #
Effect NRPN Parameter Values
1
Noise suppressor
(NSP)
00 00 Threshold 0 – 100 = –84.0, –83.4, –82.8, –82.2, –81.6, –81.0,
–80.4, –79.8, –79.2, –78.6, –78.0, –77.4, –76.8, –76.2,
–75.6, –75.0, –74.4, –73.8, –73.2, –72.6, –72.0, –71.4,
–70.8, –70.2, –69.6, –69.0, –68.4, –67.8, –67.2, –66.6,
–66.0, –65.4, –64.8, –64.2, –63.6, –63.0, –62.4, –61.8,
–61.2, –60.6, –60.0, –59.4, –58.8, –58.2, –57.6, –57.0,
–56.4, –55.8, –55.2, –54.6, –54.0, –53.4, –52.8, –52.2,
–51.6, –51.0, –50.4, –49.8, –49.2, –48.6, –48.0, –47.4,
–46.8, –46.2, –45.6, –45.0, –44.4, –43.8, –43.2, –42.6,
–42.0, –41.4, –40.8, –40.2, –39.6, –39.0, –38.4, –37.8,
–37.2, –36.6, –36.0, –35.4, –34.8, –34.2, –33.6, –33.0,
–32.4, –31.8, –31.2, –30.6, –30.0, –29.4, –28.8, –28.2,
–27.6, –27.0, –26.4, –25.8, –25.2, –24.6, –24.0(dB)
00 01 Supression 0 – 100 = 0 – 100
00 02 Attack 0 – 100 = 0 – 100
00 03 Release 0 – 100 = 0 – 100
00 04 Switch 0, 1 = Off, On