Teac 2488 Reference Manual - Manual (Page 24)

5 – Error and status messages
24
TASCAM 2488 Reference Manual
25
Not enough room
on hard disk for
this operation.
Press [EXIT].
No enough space on the hard disk to create
the image file necessary to create a CD. Press EXIT and create space by deleting
songs, etc.,( SONG->ERASE ) backing them up
if necessary (this operation cannot be
undone). You can free up space on a partition
other than the current partition (use the
DISK->SELECT function) in order to create
space for the image.
26
Protected song.
Unprotect with
SONG PROTECT.
Press [EXIT].
Recording, track editing, recording, titling,
etc. cannot be carried out when the current
song has been protected. Press EXIT , and use the PROTECT menu item
from the SONG menu to remove the
protection from the song before proceeding.
27
Repeat mode is
selected.
Cannot do this
operation now.
Press [EXIT].
Because repeat mode is selected, the
following functions cannot take place: locate
operation, track editing, undo/redo, auto
punch, quick routing, all menu operations,
and shutdown. Press EXIT and cancel the repeat mode
( REPEAT key) before proceeding with the
operation that produced this message.
28
SSA mode is
selected.
Cannot do this
operation now.
Press EXIT.
Because SSA mode is selected, the following
functions cannot take place: MTC slave
operations, jog and trim functions, recording
(including auto-punch) and digital input. Press EXIT and cancel the SSA mode
( PITCH/SSA key) before proceeding with
the operation that produced this message.
29
Time between IN
and OUT is too
short. Re-set
the points.
Press [EXIT].
Repeat playback or auto-punch operations
cannot be carried out because the time
between the IN and OUT locate markers is
too short. Press EXIT , and re-enter or edit the IN and
OUT points so that the time between them is
longer, before attempting the operation
again.
30
Too many locate
markers. Use
DELETE MARK to
delete some
markers.
Press [EXIT]. More than 999 markers have been set in the
song and so a new marker cannot be
entered. Press EXIT , and use the DELETE key from
the home screen to delete some of the
unwanted marks.
31
Too many songs to
continue with this
operation.
Press [ENTER].
Copying a song has failed because there are
too many songs already on the selected or
target partition. Press ENTER . Back up any songs you want
to keep, and then use the ERASE menu item
from the SONG menu to erase unwanted
songs, or songs you have backed up before
proceeding with the song copy (deleting
songs cannot be undone).
32
Too many songs.
Use SONG ERASE
to delete songs
you don’t need.
Press [EXIT].
There are too many songs stored on the
current partition (the limit is 250 songs on
one partition) for a new song to be created,
or a song that has been backed up to be
restored. Press EXIT . Back up any songs you want to
keep, and then use the ERASE menu item
from the SONG menu to erase unwanted
songs, or songs you have backed up before
proceeding with the creation or restoration
of a song (deleting songs cannot be undone).
Alternatively, use
DISK -> SELECT to select
another partition.
No. Message Meaning Action