Teac 2488 Reference Manual - Manual (Page 5)

1 – MIDI Control/Program Change messages
TASCAM 2488 Reference Manual
5
Mic effects
Mic effects are controlled by channels 1 through 8
(see above for channel/input assignments enabled
through Bank Select). One of three different types of effect can be selected
as a mic effect: compressor, de-esser or exciter.
Stereo dynamics processor
The dynamics processor inserted at the stereo master
bus can be either a compressor or an expander. Use
MIDI channel 9 to control this processor.
Effect NRPN Parameter Values
Compressor (CMP)
00 00 Threshold 0 – 100 = –40.0, –39.6, –39.2, –38.8, –38.4, –38.0, –37.6, –37.2,
–36.8, –36.4, –36.0, –35.6, –35.2, –34.8, –34.4, –34.0, –33.6,
–33.2, –32.8, –32.4, –32.0, –31.6, –31.2, –30.8, –30.4, –30.0,
–29.6, –29.2, –28.8, –28.4, –28.0, –27.6, –27.2, –26.8, –26.4,
–26.0, –25.6, –25.2, –24.8, –24.4, –24.0, –23.6, –23.2, –22.8,
–22.4, –22.0, –21.6, –21.2, –20.8, –20.4, –20.0, –19.6, –19.2,
–18.8, –18.4, –18.0, –17.6, –17.2, –16.8, –16.4, –16.0, –15.6,
–15.2, –14.8, –14.4, –14.0, –13.6, –13.2, –12.8, –12.4, –12.0,
–11.6, –11.2, –10.8, –10.4, –10.0, – 9.6, – 9.2, – 8.8, – 8.4, – 8.0,
–7.6, –7.2, – 6.8, – 6.4, – 6.0, – 5.6, – 5.2, – 4.8, – 4.4, – 4.0, – 3.6,
– 3.2, – 2.8, – 2.4, – 2.0, – 1.6, – 1.2, – 0.8, – 0.4, 0.0(dB)
00 01 Ratio 0 – 100 = 0 – 100
00 02 Attack 0 – 100 = 0 – 100
00 03 Post Gain 0 – 100 = 0 – 100
De-esser (DSR)
00 04 Frequency 0 – 20 = 1.00, 1.07, 1.15, 1.23, 1.32, 1.41, 1.52, 1.62, 1.74, 1.87,
2.00, 2.14, 2.30, 2.46, 2.64, 2.83, 3.03, 3.25, 3.48, 3.73, 4.00(kHz)
00 05 Depth 0 – 100 = 0 – 100
Exciter (EXC)
00 06 Frequency 0 – 20 = 1.00, 1.07, 1.15, 1.23, 1.32, 1.41, 1.52, 1.62, 1.74, 1.87,
2.00, 2.14, 2.30, 2.46, 2.64, 2.83, 3.03, 3.25, 3.48, 3.73, 4.00(kHz)
00 07 Depth 0 – 100 = 0 – 100
Effect NRPN Parameter Values
Compressor (CMP)
00 00 Threshold 0 – 32 = 0 – –32dB
00 01 Ratio 0 – 14 = 1.0:1, 1.1:1, 1.3:1, 1.5:1, 1.7:1, 2.0:1, 2.5:1, 3.0:1,
3.5:1, 4.0:1, 5.0:1, 6.0:1, 8.0:1, 16:1,
∞:1,
00 02 Attack 1 – 100 = 1 – 100(msec)
00 03 Release 1 – 100 = 1 – 100(msec)
00 04 Post Gain 0 – 32 = 0 – 32(dB)
00 05 Switch 0, 1 = Off, On