Teac DR-05 V.2.00 - Manual (Page 9)

TASCAM DR-05
9
TASCAM DR-05
9
Preparation
Powering the unit
8 Using AA batteries
1. Slide open the battery compartment cover on the back of
the unit.
2. Install 2 AA batteries with their ¥ and ^ marks as
shown in the battery compartment .
3. Close the battery compartment cover.
•
Use the BATTERY TYPE item of the SYSTEM menu to set
the type of battery in order to accurately show the amount
of power remaining and allow the unit to accurately
determine whether enough power is available for proper
operation. (By default, this is set to “ALKAL” for alkaline
batteries.)
Starting up the unit
Press and hold the (HOME)[8] button until TASCAM
DR-05 (start-up screen) appears.
The Home Screen appears when the unit starts up.
Setting the built-in clock
When the unit is started up for the first time (or when the
built-in clock is reset after being left unused without batteries),
the DATE/TIME screen appears before the start-up screen to
allow the date and time to be set.
Use the .// and +/− buttons to set the date and time,
and press the 7 button to confirm.
Shutting down
Press and hold the (HOME)[8] button until LINEAR
PCM RECORDER appears on the display.
The power turns off after the unit completes its shutdown
process.
Connecting monitors and headphones
To listen with headphones, connect them to the /LINE OUT
jack.
To listen with an external monitoring system (powered monitor
speakers or an amplifier and speakers), connect it to the /
LINE OUT jack.
Headphones Powered monitor speakers
or amplifier and speakers
Basic operation procedures
1. Press the MENU button to open the MENU screen.
2. Use the + and – buttons to select (highlight) menu items,
and use the 7 button to open that setting screens.
3. Use the + and – buttons to select (highlight) the setting
item, and press the 7 button.
4. Use the / or 7 button to move the cursor to the
right and highlight the setting value.
5. Use the + and – buttons to change the setting.
6. Press the . button to move the cursor left if you want
to set a different item in the same menu.
7. Repeat step 3 to 6 as necessary to set other items as
necessary.
8. When finished, press the (HOME)[8] button to
return to the Home Screen.
Menu structure
MENU
REC SETTING Make recording settings
PLAY SETTING Make playback settings
BROWSE
Work with files and folders on the
SD card
SPEAKER Turn the built-in speaker on/off
OTHERS Open the OTHERS submenu
INFORMATION View information
MONITOR MIX Set the monitor mix function
TUNER Use the tuner
EFFECT Make effect settings
FILE NAME Make file name settings
DATE/TIME Set the date and time
SYSTEM Make system settings