Teac DR-05 V.2.00 - Manual (Page 15)

TASCAM DR-05
15
Category Desired action Function name Procedures, buttons used and explanation
Unit settings
Set the date and time Home Screen w MENU w OTHERS w DATE/TIME
Use this function to set the internal clock, which is used for the recording dates written to files, for example.
Turn the speaker off Home Screen w MENU w SPEAKER w OFF
Do this to stop sound output from the speaker in the back of the unit.
Turn plug-in power on Home Screen w MENU w REC SETTING w MIC POWER
Make this setting when using an external mic that requires plug-in power.
Check information about the
unit and the card.
Home Screen w MENU w OTHERS w INFORMATION
Use this function to check the unit firmware version and the amount of remaining space on the card, for example.
Change the power saving
function setting
Automatic power saving Home Screen w MENU w OTHERS w SYSTEM w AUTO PWR SAVE
This function automatically turns the unit off when it is not used for some time.
Change the backlight setting Home Screen w MENU w OTHERS w SYSTEM
w
BACKLIGHT
Use this to change the display backlight setting.
Adjust the display contrast Home Screen w MENU w OTHERS w SYSTEM w CONTRAST
Use this to set the contrast of the characters on the display.
Set the battery type Home Screen w MENU w OTHERS w SYSTEM w BATTERY TYPE
Select the type of battery being used. This setting affects the accuracy of the remaining battery display.
Restore the unit to its default
settings
Initialize Home Screen w MENU w OTHERS w SYSTEM w INITIALIZE
Use this function to restore all settings to their factory defaults.
Quickly format an microSD
card
Quick format Home Screen w MENU w OTHERS w SYSTEM w QUICK FORMAT
Use this function to format cards. You should usually use the quick format function to format a card.
Completely format an
microSD card
Full format Home Screen w MENU w OTHERS w SYSTEM w FULL FORMAT
Use this only when you want to completely erase the data on a card.
Set the file name format Home Screen w MENU w OTHERS w FILE NAME
You can change the characters used in the file names that are automatically assigned.